During the summer season, the first thing that comes to your mind is to relax on the beach. The vitality and freshness of nature have the power to elevate your mood within an instant.
But the thing is, you can’t go to the beach without bringing some practical essentials, right? One of the most important things you should have in your arsenal is the best beach umbrella. Not only will this give you proper shade and save you from the scorching heat, but you can also prevent the chance of getting sunburned.
So, how to install beach umbrella? The process is pretty easy, and you will be happy to know that we have got it covered in this article. Without further ado, let’s get started.
The Installation Process
Here is the step-by-step process that you can follow to get the job done. The task is not challenging, and it won’t take much of your time to set it up. Check it out.
Step 1: Check the Umbrella’s Condition
Before you dive into the installation process, you should check the umbrella’s condition. Ensure that it is properly closed or else, you will be in jeopardy.
Most of the beach umbrellas vs canopy consist of two separate parts. One of them is the pole which is used to stick to the sand. The other one has a fixed umbrella, and you should connect it to the first one when everything is all ready.
So, you should leave the part with the umbrella on the other side for the time being and focus on working with the other part.
Step 2: Pick a Spot for the Set-up
Choose an area that is large so that your umbrella can easily open up without any issue. Next, take the pole and stab it straight into the sand surface. Apply average force currently and don’t use too much of your energy.
If possible, bend your knees a little bit so that you can prevent hurting your back.
Step 3: Create a Hole in the Sand
This step is crucial, and you should do it slowly and precisely. Once the pole is inside the sand, use your two hands and wrap them around the pole’s top portion.
Make a firm grip and use your body weight to press the pole further down. To make it easier, you should hold it and move it in a round or circular motion. In this way, you will be able to make a hole. Make sure it is not too big; keep the size within 2-inches or less.
Step 4: Increase the Hole’s Depth
After you have circularly moved the pole, shift the motion in a forward and backward direction. This will increase the hole’s depth.
With your force and this new pole movement strategy, you will notice that the pole is gradually sinking into the sand surface.
Step 5: Analyze the Wind’s Direction
At this point, you should have created a hole that will be between 12 and 15-inches. Now, analyze where the wind direction is and make sure it is correct.
You can even use a thin cloth and hold it in your hand to find out where the wind is currently moving. When you have checked the direction, slightly tilt the pile around 5 degrees. Keep the angle in the wind’s direction.
This smart approach will give you an idea of how your umbrella will perform when attached to the pole.
Step 6: Fill the Hole
Since there will be an empty area surrounding the pole, you should fill it up with sand. Simply use one of your feet and push the sand directly into the hole. Do it constantly to the point where the sand and the surface are at a perfect level with each other.
Furthermore, take some additional sand and use it around the pole’s base. To tighten up the whole thing, press the sand down with your feet.
Step 7: Connect the Umbrella to the Pole
You can have a sigh of relief because you are almost done with the task. Take the attachment containing the umbrella and don’t open it immediately.
There is a connection system between both parts, so you don’t have to worry about that. Gently attach the top and bottom portions with ease.
Step 8: Open the Umbrella
Use one of your hands to hold the pole and the other to open the umbrella. When it is fully opened, you can now enjoy your time on the beach. Cheers!
Congrats! Your task is completed.
Up to this point, you are aware of how to install the beach umbrella. Here are some of the things that you should consider all the time.
Tip 1: Don’t Move the Umbrella Too Much
Yes, after you are done with the installation process, you should avoid moving it from one direction to another. If you do it, there is a possibility that your umbrella will slowly start to loosen inside the stand.
Unfortunately, this could destabilize the whole thing, and you might have to restart the entire process.
Tip 2: Keep the Kids Away from the Pole
If you have kids, don’t let them come nearer to the pole. Since they will be in a playful mood, they might ruin the umbrella adjustment unknowingly.
So, keep them busy by giving them some beach toys or other stuff.
Tip 3: Close the Umbrella If You Will Move Around the Beach
This is not mandatory, but you can give it a try to keep the umbrella intact into the ground. If you close the umbrella when you and your family aren’t around that spot and prefer to move around, the wind won’t be able to do anything to the pole.
Tip 4: Check the Pole a Couple of Times When You Are on the Beach
If you are going to stay on the beach for a long time, you should check the pole’s condition a couple of times. Give it a shake and find out if it is still tight inside the sand or not. If it’s not, you have to fix it tightly once again. Don’t forget to close the umbrella before you take this approach.
How to install beach umbrella is not a mystery anymore. Now, you can easily answer all its aspects without any hesitation.
If you see your friends or family members struggling with this thing, share this article with them.
Enjoy your time on the beach. Have a good day.