How to Install Ventless Gas Logs

How to Install Ventless Gas Logs?

Did you know that you can set up a fireplace without the need for a chimney or vent? Well, Yes! It is now possible, thanks to the best ventless gas logs that are present at the moment. This technological marvel can solve the problem of not having a dedicated chimney in your home.

However, if you do not know how to install ventless gas logs, you could be in big trouble. But as you have stumbled across this article, you now have nothing to worry about. We are going to fill you in with every bit of information that you would require to install one of them. So, you can leave the rest to us.

Steps to Install Ventless Gas Logs

We are going to keep things simple. For that reason, we have bunched a step-by-step guide that will be pretty easy to follow. And the guide is as follows:

Step 1: Take the Old Logs out

First and foremost, you should remove the old logs if there are any. Prior to this, you should make sure that the gas line is shut. Find the nearest gas valve and turn it to the left. That will close the gas line, which will prevent the gas from flowing. However, if there is no valve in the line, you should turn the main valve off.

After turning the gas off, take off the cover and lift out the logs that are kept in the place. Then you need to remove the fabric that is at the bottom, revealing the burners. You should also remove the flexible gas line attached to the burner.

Step 2: Choose Your Logs

As you know by now, ventless gas logs vs vented are available in different designs and styles. These basically serve the purpose of aesthetics. These are 100 percent safe, look good, and can produce heat at the same time. However, the heat rating will not be the same for all of the types.

The heat rating will basically depend on the BTU. Nevertheless, the BTU will not exceed more than 90000. And unlike the vented systems, the heat does not escape from the vent or the chimney. The only thing that you need to consider is the BTU. So, choose your logs adequately.

Step 3: Install the Logs in Place

The installation process for this is relatively hassle-free and quick. You should grab the flexible gas line that you removed earlier and place it on the new burner. Use a wrench to tighten the line properly. Place the new burner accordingly. Also, do make sure that you do not cover the new burner.

If you cover the burners, heat will be trapped. So, we would recommend you only cover the area when you are not lighting up the logs. After placing the logs, you can center them accordingly.

Step 4: Turn the Gas Line On

Now that you have placed all of the things properly, you can turn on the gas line. However, you should ensure that the flexible gas line is secure before turning the line on.

Fireplace Accessories that Make the Ventless Gas Logs Run Better

Now that you know how to set up the ventless gas log properly, you would want to know about the things that make them run better, right? Well, these are as follows:

a) Poker

A convenient tool will always make it easier to move the wood when it is burning. And that convenience, in this case, would be the poker. With that, you can move the logs and rearrange them when they are burning. And you would want to rearrange them to promote better airflow.

Additionally, the poker will add towards hearth safety. It will let you control the fire and move the burning logs while keeping a safe distance.

b) Fireplace Doors

The thing that acts as a safety net for the fireplace is its doors. These will also make sure that the sparks do not fly into the various places of the room. As a result, the chances of a fire accident will be less.

In addition to that, the doors can help you control the heat. You can turn the heat down by closing the door. Also, those will block the ashes from getting inside the room and causing a mess.

However, we recommend you get glass doors. Those will let you enjoy watching the fire. Also, there are a plethora of attractive designs available for the glass doors. So, you can make the place look a bit more aesthetic if you want to.

c) Ash Buckets

[su_youtube_advanced url=”https://www.youtube.com/watch?v=i9FEbhIQS-0″]

The ash buckets are one of the convenient things that you would want to have if you have a fireplace. It will make the cleaning process hassle-free. All you need to do is collect the ash and fill the bucket up. Once the bucket is full, you can dispose of it properly. So, you can see how easy the cleaning process gets if you have these.

d) Bellows

Blowing the fire with your mouth is a tedious process. That is where the bellows come into play. These will enable you to supply the air to the fire efficiently and comfortably.

e) Log Holders

One of the must-have tools you need is the log holder. These act like a storage tool for the logs. These are going to keep the wood stacked neatly around your fireplace. So, you can save yourself from making countless trips from outside to inside.

Also, if you have ready wood right beside the fireplace, making the fire last for a long time will become easy. You can even start it whenever you like.

Final Words

Hopefully, our detailed guide was informative enough, giving you an idea in terms of how to install ventless gas logs. And we hope that you will not face any difficulties in the future as you now know about the process.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top