How to Put Solar Lights in the Ground

How to Put Solar Lights in the Ground?

The best solar path lights are the most cost-effective and environmentally-friendly way to light up your pathway. That is not all. The installation process is comparatively more straightforward than the other versions as well.

However, if you do not know how to put solar lights in the ground, you will not be able to install them properly, no matter how easy the process is. But there is nothing to worry about because we will offer every bit of knowledge related to the installation procedure.

Hopefully, after going through the entire article, installing these in your pathway will be like taking a walk in the park.

Steps to Follow to Install Solar Lights in the Ground

To keep things simple, we came up with a step-by-step procedure to guide you through the installation process. So, let us not waste any more of your valuable time and get started with the step you should follow to install solar lights in the ground.

Step 1: Getting the Required Tools

First and foremost, you should get yourself the required tools. It would be best if you got yourself a powerful drill, Phillips drill bits, measuring tape, and finally, the lights that need to be installed on the ground. Once you get all of them, keep them somewhere where it will be easy for you to reach them.

Step 2: Planning the Spots

Now that you have all of the required tools, start planning the spots. For this, two things should be considered. One is an appropriate position where the sunlight is readily available during the day. Another is the coverage of light. Make sure that each of the lights has an adequate distance between them.

The proper amount of distance will depend on the coverage of each of the lights. If you leave too much space in the middle, it will not be possible for you to light up the entire pathway properly. So the coverage part is something that you would want to put proper emphasis on. Here is where you will need a measuring tape.

Additionally, do make sure that the spot that you are choosing does not have hard soil. It will be difficult for you to stake the bottom into the ground with hard soil; it will be difficult. However, you can soften up the hard soil by watering it. Nevertheless, soft soil would be an ideal pick for this.

Step 3: Charge the Lights up

Before installing the lights, we would recommend charging the lights up for a while. You can leave them under the sun for about a day or two. That should fully charge up the lights. However, you can skip this if you are starting the installation process early in the morning.

They will have enough time to charge up throughout the day. But it would be better to charge them up before installing because that will ensure that they will function optimally on the night that you are installing them.

Step 4: Install the Lights

All that is left to do at this point is to install them. This process is as easy as it sounds. However, as there are different varieties of lights, the installation process will not be the same for all of them. Some of them might require you to mount the bottom on a fixture. For those, you need to use the drill machine.

However, if the bottom has a stake, the process should be reasonably easy. All you need to do is soften the soil up a bit and then drive them it. Additionally, some will let you attach solar lights vs low voltage to the fences. For those, you are going to need PVC tape and screws.

Step 5: Comply with the Manual

After installing, you should read the manual that comes with the package. That will contain some useful information that will make it easier for you to use the device. It might also include some necessary information for starting the device. You can also tune the solar light properly by following those steps.

Important Tips to Consider

Before diving right into the installation process, you need to consider a few things. They are:

a) Position

As we have mentioned earlier, the positioning of the lights is pretty important. It is the only tricky thing that you need to do throughout the entire process. And remember, measure twice, mark once. Take the sunlight availability and coverage of the light into your consideration when calculating the positions between each.

b) Charging the Lights Before Installation

Another thing that we have already mentioned is that to charge the lights up before installing them. As with new smartphones, which you would charge up fully before using, these would operate optimally for an extended time if you charge the cells up before installing them.

Additionally, if you install them while the cell is fully charged, you should get the full performance right from the first night.

c) Loosen the Soil Up a Bit

Even if the soil is not that hard, we would recommend loosening it up a bit. Watering works like a charm in this regard. If you water the soil a bit, it will be pretty easy for you to stake the bottom into the ground. This process will also ensure that the stakes can go deeper into the ground.

d) Use a Pot If You Have to

Cannot install the lights directly on the ground? Well, you can use a flower pot as an alternative. Install the lights in them by putting some soft soil. This will work flawlessly, and most importantly, you would not have to dig them out if you want to reposition them.

Final Words

Now that you have gone through the entire article, hopefully, you will not have to look any further to know how to put solar lights in the ground. We hope the lights that you install shines bright and offer an adequate amount of light to lighten up the entire pathway.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top